KDS FLYMENTOR DRIVERS FOR WINDOWS DOWNLOAD

The gyro in Flymentor is only as good as a cheap piezo gyro. I would just fit the gyro right side up but I run into a interference problem with the boom struts when mounted this way.. Quote message in reply? If you are using the FM tail gyro connect tail servo to port 5 on FM. Note , If the blue wire is connected stabilization gain is controlled and adjusted in the TX and adjusting it in Helibal will have no effect, if it is disconnected stabilization gain is adjusted in Helibal. The CCD Camera should be mounted underneath the main shaft or on the side frame of the helicopter, with the lens pointing at the ground and free from vibration, it works best in the attitude of 1m to 3m.

Uploader: Aralabar
Date Added: 10 April 2012
File Size: 63.22 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15867
Price: Free* [*Free Regsitration Required]

If you are using the FM tail gyro connect tail servo to port 5 on FM.

Review of the KDS Flymentor

Yes I have tried to fllymentor turn kds flymentor camera around Kds flymentor the elevator servo is front mounted, The left servo kdz port 2 kds flymentor right servo to port 1. The system provides 2 main features, Stabilizing Mode and Positioning Mode. Keep balance in inverted flight. I guess I could just remove them.

Switch to Hybrid Mode. Check stick directions and any that are incorrect reverse under the control tab and send to FM.

Yes, if you like this auto pilot function. Move heli forward it says go faster move it backward it says go fast same right and kds flymentor. Looking at the heli from the side use the kds flymentor neutral slider under the servo tab to level the swash, looking at the helicopter from the front use aileron slider to level the swash. What does the flymentor 3D do? Description Reviews 0 Related Products 0. In order to verify that you are a human and not a spam bot, please enter kds flymentor answer into the following box kds flymentor based on the instructions contained in the graphic.

The left hand servo connects to port 1 on Kds flymentor hand servo to port 2 and elevator to port 3. The CCD Camera should be mounted underneath the main shaft or on the side frame of the helicopter, with the lens pointing at the ground and free from vibration, it works best in the attitude of 1m to 3m. Channels of aileron, elevator and pitch must be connected with receiver. If the helicopter is not dancing increase the gain until it does and then reduce just enough to kds flymentor it.

Note, when you switch to HH the tail servo will drift to one end, this is normal and it will sort kd out when you lift kds flymentor into a hover, help it a little with the rudder stick. Set a linear pitch curve With the helicopter in position kds flymentor green light if the helicopter rocks side to side and fore and aft kds flymentor in a hover reduce kds flymentor gain just enough to stop it.

Kds flymentor Posted by JerryB first of all great notes it help me alot this system is not an ez add on, i have a HK i mounted mine on and after reading your message and looking my heli over i”m sure i have it all set up right but when i try taking off it wants to fly to the right every time, then i tried trimming it out more still the flymenror thing any ideas what i can try next?

Guaranteed Delivery see all Guaranteed Delivery. Are you saying it corrects ok on aileron but not on elevator Are the servos moving at all when you tip the hel forwards. Since we are tired on fpymentor complains on those newbies who have trouble in setting up the FlyMentor and then said it is defected. Attrition between belt and metal will get static electricity, and it will disturb other kda devives of helicopter.

FlyMentor Setup By Ivor Hill PLEASE READ FIRST!! – HeliFreak

The blades and flybar kde remain level, if they tip then you have to much vibration and flying the helicopter will result in a crash. Pinion with screw for Brushless Motor 3. If you use your kds flymentor gyro the Flymentor flymentkr still has to be fitted kds flymentor it also contains the stabilization gyro,so you would have 2 gyro’s fitted to your heli.

The concept is basically an Eye watching the ground and kds flymentor adjustment, kinda like a real human. Switch working mode horizontal mode and position mode through AUX channel. Save kds flymentor to get e-mail alerts and updates on your eBay Feed. Just like a real Auto Kds flymentor when you need a break.

You may also need to use a little TX trim to kds flymentor the helicopter drifting. Malaysian Ringgit US Dollar.

Helipal.com – DJI Products Special Arrangement

It can be placed kds flymentor, just far from vibration and heat. Please enter a valid email address for yourself. I have it mounted with arrow to rear as is the gyro, but gyro is mounted upside down. Others have said that they kds flymentor it to work but didn’t say how. Do not forget to save your flymentod file after you have set up FM. Resulting the helicopter will stay in a Fixed position. You may add magentic ring on wires between controller, sensor and CCD to reduce electronic disturbance.

Originally Posted by Rlymentor. Best kds flymentor Co-Axial Heli!

Condition see all Condition. Connected,controlled by TX disconnected controlled in Helibal. Tip the helicopter and under the servo tab flymentpr the servo directions and kdz to FM so that when the helicopter is tipped, the swash moves to correct in the opposite direction.

The sensor of Kds flymentor 3D must be mounted horizontally. Originally Posted by goodsamaritan You can also use setup card kds flymentor trimming? What we provide you is a brand new box supplied from KDS factory.

Now fit a pitch gauge and under the control tab use pitch slider to set pitch range. Once in kds flymentor mode the tail servo will move to center, set the tail slider so that it is a little off center this is to counter the rotor torque Test fly and slide the servo along kds flymentor boom until the fllymentor will hover without stick kds flymentor or trim. Let us know your shipping location. Any easy way to set this up right?? Disconnect motor, power up TX and Helicopter, LED on FM should kds flymentor flashing green, and connect to Helibal Program Check that swash type,blade direction and gyro camera directions are set correctly under the Helibal mounting tab.